Parkside Canister Cleaner Cartridge Filter Wet and Dry
- Models this Fits
- Finding Model No.
- Ask A Question
This Parkside Canister Cleaner Cartridge Filter Wet and Dry is designed to fit the following model(s):
PNTS 1250, PNTS 1300/A1, PNTS 1400/ A1, PNTS 1500/A1,
PNTS 1300/B2, PNTS 1400/B1, PNTS 1500/B2
PNTS 1300 C3
PNTS 30/4, PNTS 30/6, PNTS 30/6S,
PNTS 30/7, PNTS 30/7E,
PNTS 30/8E, PNTS 30/9E,
PNTS 34, PNTS 38.
(Sold in Lidl)
Measurements 180mm OD x 145-150mm (flexible push fit) ID x 165mm High
1. This filter can be used in wet or dry mode.
2. This filter may differ from the original as it has an enclosed base and is retained by the 150mm internal diameter at the top.
3. If you have a foam sleeve to fit your cleaner for use in wet mode, then this filter will replace it.
(Pack of 1)
Where should I look?
The model number will be displayed on an electrical rating label which will be either on the side or base of the vacuum cleaner.
What should I see?
Your model or type number will be a combination of letters and numbers, sometimes separated by a dash (-) or a slash (/).
What if not found?
Call our customer services team on 0800 542 5852 and we'll try to assist you.